Zen & Pur Vital Juicer Manuel D'utilisation page 23

5
O P E R A T I N G I N S T R U C T I O N S
1. Plug in the juicer.
2. Place a container below the juicer outlet and another
container below the pulp outlet.
3.The juicer power button (located at the top of the han-
dle) has 3 positions.
A. ON
- This starts the motor and juicing process
B.OFF
- Is the central position of the button.
It switches off the appliance.
C. REV
- Is reverse. Only use this function when something is stuck in
the juicer and it needs to be unclogged.
4. Prepare the material you wish to juice.
The Slow juicer is designed to juice many different materials.
Ensure juice material is cut into small portion for optimal juice
extraction. Each portion should easily fall down the hopper chute
without the need for force. Remove any large pips or seeds. This
includes stones from stone fruits and peel from citrus fruits. Always
pre-wash food before juicing.
.Switch the power button to "ON", insert food slowly to the hopper
and allow juicer have time to work.
Do not overstuff the hopper or force food in. The pusher is only be
used if food becomes stuck. (See Fig 8).
When you are finished switch the power button to 'OFF'.
I
If the machine becomes clogged and inoperable.
Turn the machine off and press the reverse button for a few seconds
then try operating again.
Note: The reverse button works with a 'pulse' motion.
If the reverse button does not work turn off the machine and switch
off at the power point. Disassemble the unit to dislodge any material
then reassemble as per the instructions and try again
23