Kimex 150-2X01W Manuel D'utilisation page 19

S-A (x8) S-B (x8)
Hex Head Screw Hex Head Screw
S-D (x2) S-E (x2)
Phillips Head Screw Phillips Head Screw
S-G (x3)
S-H (x10)
Cable Clip
Anti-Vibration Pad
Now let's start the installation.
5
S-C (x10)
Phillips Head Screw+ 1 Spacer
S-F (x4)
Phillips Head Screw
S-I (x1)
Allen Wrench
Attaching Side Brackets
Shipping
Blanket
• Please prepare a spacious area for installation, and put a shipping blanket on the area
to prevent scratches.
• Carefully place the desktop(not included) upside down on the blanket.
• Place the crossbar A and side brackets on the top.
B
• Attach the side brackets B to the end of the crossbar A
Note: The drawings of both of the crossbar and side brackets are the backside of the components. Please make
sure the crossbar and side brackets keep facing down while installation, which is convenient for the further steps.
A
B
. (This step doesn't require the use of the screws.)
6