Bose DesignMax DM8S Notice D'installation page 4

Setup
Installation Options
q
Installation Options and Accessories
q
Mounting bracket (included)
w
RMUBRKT1 Pan-and-tilt bracket (optional)
Wiring the Loudspeaker
Wire Gauge
The DesignMax DM8S loudspeaker is designed to work with 18 AWG (0.8 mm
Connection Diagrams
Expose six millimeters (1/4 inch) of bare wire to attach to the terminals.
Note: The loudspeaker is not
rated for use with a rigid conduit.
The loudspeaker is suitable
for a flexible conduit or wiring
connection only.
Loudspeaker Settings
4 • English
) to 14 AWG (2.1 mm
2
70V/100V
2.5W 5W
5W 10W
* Factory default
Transformer Tap Setting
Set tap by turning. Use a flat head screwdriver.
BoseProfessional.com
w
) size wire only.
2
8Ω
70V
10W 20W 40W
20W 40W 80W
100V
** NC: No Connection (do not use)
DesignMax DM8S • Installation Guide
80W*
8Ω
NC**