SW-Motech KFT.22.995.65000/B Instructions De Montage page 84

5
Attaching the DUSC to a side case
5.1 - Press the DUSC release button (1) and pull the system latch buckle to
the open position.
5.2 - Press the DUSC (1) with the two locking openings onto the mushroom-
shaped supports of your SW-MOTECH side carrier.
5.3 - Press the DUSC (1) with the locking opening onto the locking lug of your
SW-MOTECH side carrier.
 WARNING: You should be able to hear a clicking sound!
5.4 - Press the system latch buckle to closed position.
 WARNING: Ensure the DUSC is firmly positioned!
 WARNING: Make sure that no components of the DUSC (1) can come into
contact with any hot and moving parts on the vehicle!
Also ensure that all components are at least 5 cm away from hot parts as
well as hot gas coming from the exhaust!
After assembly, make sure that this distance is maintained in all vehicle
positions!
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!
8
Errors and omissions excepted
Subject to technical and design changes.