SW-Motech KFT.22.995.65000/B Instructions De Montage page 11

Take note of the symbols and what they mean in the
ASSEMBLY section. If the term OEM appears in the
ASSEMBLY section, the vehicle manufacturer's
specifications must be observed and applied.
Use thread locker: Indicates that a thread must be
coated with liquid thread locker. H (HIGH): high
strength; M (MEDIUM): medium strength; L (LOW):
low strength.
Do not use thread lock: Indicates that no liquid
thread lock should be used at this point.
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
LEGEND OVERVIEW · READ AND KEEP MOUNTING INSTRUCTIONS!
If you have any questions, please don't hesitate to contact
our Customer Service team or our distributors. You can
find our telephone number and a list of our distributors in
our online shop:
www.sw-motech.com
Tighten/note the tightening torque information:
Indicates the tightening torque of a part specified by SW-
MOTECH or the vehicle manufacturer (OEM).
2
Errors and omissions excepted
Subject to technical and design changes.