Yamaha R-N1000A Guide Rapide page 8

2-2 Automatic adjustment of speaker settings (YPAO)
Use the included YPAO microphone and run YPAO.
YPAO is a function that detects speaker connections and the distance from the listening position, then
automatically adjusts the speaker settings, such as volume balance and tone.
1
Turn your subwoofers on and adjust the volume to its midpoint.
If the crossover frequency can be adjusted, set it to the maximum.
CROSSOVER/
VOLUME HIGH CUT
MIN MAX MIN MAX
This step is not necessary if a subwoofer is not connected.
2
Put the included YPAO microphone in the listening position and connect it to the YPAO MIC jack on the
front panel.
YPAO MIC
YPAO MIC jack
1
9
The following message appears on the front display.
NOTE
Secure the YPAO microphone in place so it does not move. If a camera tripod is used for the microphone, its
screws can be used to secure the microphone.
8
9
2
Listening position
Ear height
YPAO microphone