Krüger & Matz TT-501 Mode D'emploi page 15

Owner's manual
TROUBLESHOOTING
Problem
can not listen to record
while recording
can not store songs as Mp3
can not record
can only record MONO
sound is crackling
direct recoding is
possible
SPECIFICATIONS
• power consumption: 6 W
• Frequency response: 100 Hz-12 kHz
• S/N ratio: 50 dB
• 2 selectable speeds (33/45 rpm)
• Anti-skating (0-4 g)
• Wow and flutter: <0.3% WRMS (JIS WTD)
• Audacity software included
• Starting & braking time: < 1 s.
• Belt drive
• USB compatible turntable; vinyl digitizing function (record to PC or MAC)
• USB port 1.1 (Windows XP, Vista, 7; Mac OS X)
• Line level RCA outputs with built-in preamp
• Dust cover
• power supply: 100-240 V; 50/60 Hz
Software
• activate "software playthrough" in audacity
• check the record source (USB Audio Codec)
• check volume settings of your computer
• download LAME Mp3-Codec from the internet
• first the player has to be connected with the computer,
then AUDACITY may be started.
• mostly this occurs with VISTA. please select in Windows
config recording source as "stereo" not "mono" or
"microphono"
Player
• make sure this player is connected to a high-level-input of
your amplifier. High-level inputs are: CD, AUX, TAPE. The
input pHONO is not suitable. The player has a built-in pre-
amplifier.
• clean the stylus and the vinyl
• check for correct counterweight setting
• check for correct anti-skating-level
not • USB-Stick/Card is write-protected
• check correct file system (FAT16)
Suggested solution
15