Technical Specifications - Fracarro HOME FIBRE OPT-TX 1510 Instructions D'emploi

at the socket (especially when a lot of channels are being transmitted).
FM e DAB
The FM and DAB signal levels should be at least 10dB lower than the overall input power of the
TV signal.
SAT
1. Input signal level: 69 86 dBµV
The input transponder level to the OPT-TX 15x0 must be between 69 and 86 dBµV for the ACG
(automatic gain control) to function correctly.
2. Band flatness: 4dB
The transponders should be equalised within the same polarity so that the maximum difference
in level between the transponders transmitting through the fibre is 4dB, to ensure the receiver is
able to receive correctly.
Some example diagrams are available at the end of the manual and on the website www.fracarro.
com.
Home Fibre Transmitter
Fracarro Code
RF inputs
RF outputs
Optical output
SATELLITE INPUTS
Bandwidth
Connectors type
Input return losses
Trunk line insertion loss
RF input level
TERRESTRIAL INPUT
Bandwidth
Connectors type
Input return loss
Trunk line insertion losses
RF input level
TERRESTRIAL INPUT
Bandwidth
Connector type
Input return loss
Output level Test
5. TYPICAL INSTALLATION EXAMPLES

6. TECHNICAL SPECIFICATIONS

OPT-TX 15X0
n.° 5 (4 SAT + 1 TERR)
n.° 7 (4 SAT + 1TERR + 2TEST)
n.° 1 SC/APC
MHz 950 ÷ 2150
F Female
dB >10
dB <2,5
dBµV 69 ÷ 86
MHz 87 ÷ 862
F Female
dB >10
dB <2
dBµV 90
MHz 87 ÷ 862 / 950 ÷ 2150 (HH polarity)
F Female
dB >10
74 (TV) overall power
dBµV
60 (SAT) per transponder
15