Read First; Safety Information - SEFRAM SP260B Manuel D'utilisation

Safety Information

Understand and follow operating instructions carefully.
Use the meter only as specified in this manual; otherwise,
the protection provided by the meter may be impaired.
WARNING
This identifies hazardous conditions and actions that could
cause BODILY HARM or DEATH.
To avoid possible danger, follow below guidelines.
- If the equipment is used in a manner not specified by
the manufacturer, the protection provided by the
equipment may be impaired.
- Always use proper terminals, switch position, and range
for measurements.
- To reduce the risk of fire or electric shock, do not use this
product around explosive gas or in damp locations.
- Do not apply more than the rated voltage, as marked on
meter, between terminals or between any terminal and
earth ground.
- To avoid false readings that can lead to electric shock
and injury, replace battery as soon as low battery
indicator blinks.
- Avoid working alone so assistance can be rendered.
- Do not use the Tester if the Tester is not operating
properly or if it is wet.
- Individual protective device must be used if hazardous
live parts in the installation where the measurement is
to be carried out could be accessible.
1

Read First