Publicité
Les langues disponibles
Les langues disponibles
Features and components of
the Smart Slow Juicer
1. Pusher
Used, if necessary, to push the fruit through
the pressing chamber towards the Smart Slow
Juicer's pressing screw.
2. Entry mouth
For feeding fruit and protects against splashing,
equipped with rotating hand guard. In the case
of larger pieces of fruit and vegetables, put
them in and turn them over so that they fall
into the feed mouth.
3. Hopper
Connects the feed mouth to the press chamber.
4. Press screw
The most important element of the Smart Slow
Juicer. The press screw grinds ingredients and
ensures the extraction of juice.
5. Plastic filter
The plastic filter separates the juice from the
pulp and is easy to clean.
6. Press chamber
Here, fruit and vegetables are pressed and the
juice separated from the pulp. Juice and pulp
run from here to the right outlet.
7. Pulp outlet
For the export of pulp.
8. Juice outlet
For the export of the juice.
9. Housing / motor part
The Smart Slow Juicer's housing houses the
motor and other technical and electronic
components of the device.
10. Play button
Used to start and stop the Smart Slow Juicer.
11. Reverse button
Used to change the direction of rotation
of the press screw and to remove blockages
in the pressing chamber
12. Cleaning brush
To clean the removable parts and spouts.
13. Juice container
For juice, place under the juice spout.
14. Pulp container
For pulp, place under the pulp spout.
34
All manuals and user guides at all-guides.com
1
2
3
4
5
14
6
7
8
9
10
11
13
12
Using the Smart Slow Juicer
Before using for the first time, thoroughly rinse all parts of the appliance that come into contact
with food. For instructions see 'Cleaning, Maintenance & Storage.'
Installing the Smart Slow Juicer
Assemble the machine according to the
instructions below and only use the machine
in this assembled state for pressing.
1. Place the plastic filter firmly in the pressing
chamber.
2. Place the press screw in the centre of the
chamber and press lightly. If the press screw
is not tightened properly, the hopper will
not fit properly onto the chamber.
3. Place the hopper on the press chamber (1) so
that the tabs fall into the recesses and turn
the hopper clockwise on the press chamber (2).
2
1
4. Now place the complete upper part on the
housing of the Smart Slow Juicer. If this
does not slide on correct immediately, press
lightly until both parts fit together well.
35
Publicité
