Sony SA-VE815ED Mode D'emploi page 8

Positioning the speakers
(continued)
3
Connect the speaker cord to the
speaker terminal.
The cord should be pressed into the
groove in the stand.
4
Secure the speaker to the stand with
the two supplied screws and
washers.
Notes
• Do not remove the supplied speaker grille from
the speaker while attaching the speaker to the
speaker stand.
• Do not touch or press tweeter's cover on the center
of the speaker.
8 GB
Positioning the center
speaker
(SA-VE815ED only)
Attach the center speaker to the supplied
speaker stand and place it on a top of the TV
set.
For optimum listening enjoyment, the
speaker should face directly towards the
listener. Adjust the angle of the speaker
stand for that purpose.
1
Pass the speaker cord into the hole
on the back of the stand and out
from the hole at the center of the
stand.
2
Connect the speaker cord to the
speaker terminal.