Télécharger Imprimer la page

BRICK CAR2WDSK Notice D'assemblage page 4

Publicité

Usage and Setting/
Setting
Réglage
M
1
Note
Suggestion
E08
M
1
2
999
M
1
2
Press 2s
Appuyer sur 2s
Utilisation et réglage
Desk Height
Hauteur du bureau
Up
Monter
69.8
2
Four Memory Height
Quatre hauteurs de mémoire
1. Please make sure no obstacles during up and down.
2.Don't make the desktop attach to wall.
1.S'assurer qu'il n'y a pas d'obstacles lors de la montée et de la
descente.
2.Ne pas fixer le bureau au mur.
Set height 1 as the most comfortable height when you sitting; set
height 2 as the most comfortable height when you standing; set
height 3 and height 4 as what you needed.
Régler la hauteur 1 comme la hauteur la plus confortable en
position assise ; régler la hauteur 2 comme la hauteur la plus
confortable en position debout ; régler la hauteur 3 et la hauteur 4
comme vous le souhaitez.
Abnormal Reset
Réinitialisation anormale
Condition
3
4
When the display shows an Error code: E07-E09, (Even after reset, the
display still shows error code) it doesn't work when pressing any button.
Lorsque l'écran affiche un code d'erreur : E07-E09, (même après
réinitialisation, l'écran affiche toujours le code d'erreur), il ne fonctionne pas
lorsque l'on appuie sur un bouton.
Press 5s
Appuyer sur 5s
Opération
Keep pressing the "down" button for 5 seconds, the display shows RST.
Release the button, and press the "down" button again to reset.
Appuyer sur le bouton « Descendre » pendant 5 secondes, l'écran affiche RST.
Relâcher le bouton et appuyer à nouveau sur le bouton « Descendre » pour réinitialiser.
Régler la limite la plus élevée
3
4
Press "M" button, the display shows "s-", then release the button.
Press the "up" button, after the display flashes, release the button. Then
press "M" button again for 2 seconds, and when the display
shows "999", the setting is completed.
Appuyer sur le bouton « M », l'écran affiche « s- », puis relâcher le bouton.
Appuyer sur le bouton « Monter », après le clignotement de l'écran, relâcher le
bouton. Appuyer à nouveau sur le bouton « M » pendant 2 secondes. Lorsque
l'écran affiche « 999 », le réglage est terminé.
Page 4 of 7
Sedentary reminder
Down
Rappel sur la sédentarité
Descendre
3
4

Publicité

loading

Ce manuel est également adapté pour:

Car2bdsk