cecotec CONGA THUNDERBRUSH 750 Manuel D'instructions page 15

Filters
• Remove the dust tank (see "Dust tank installation").
• Take out the filter set from inside and separate the microperforated filter from the HEPA
one.
• Clean the dust from each filter and wash them in water if necessary. In case they are
washed with water, make sure to dry them completely before introducing them back in
the dust tank.
• To introduce the filters, align the guide on the edge with the slot on the inside part of the
dust tank and slide it down to its correct position.
• On the top part of the main body, use the tab to open the compartment and remove the
sponge filter and the felt. Tap it gently to remove all dust, clean it with water if necessary
and make sure it is properly dried before inserting it back to its position.
NOTE: Do not wash the felt.
Aspiration base
• Press the aspiration base release button and pull
from the aspiration base to remove it.
• Turn the rolling brush lock anticlockwise and
remove the rolling brush in order to clean it.
• Once the cleaning is over, reinsert the rolling
brush in the aspiration base, turn the lock
clockwise and insert the aspiration base back
into the aluminium hose.
6. TECHNICAL SPECIFICATIONS
Model: Conga ThunderBrush 750 Immortal Battery 25.9 V
Product reference: 05119
Battery: 25.9 V
220-240 V, 50/60 Hz
Made in China | Designed in Spain
7. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE), specifies that old household electrical appliances must not be disposed of with
the normal unsorted municipal waste. Old appliances must be collected separately, in
order to optimize the recovery and recycling of the materials they contain, and reduce the impact
on human health and the environment.
05119_ThunderBrush 750_MV.indd 15
All manuals and user guides at all-guides.com
CONGA THUNDERBRUSH 750 IMMORTAL BATTERY 25.9 V
ENGLISH
15
25/7/18 23:08