Warmup UCG Manuel De L'utilisateur page 3

Type UCG/UDG
11
Press the OK button. The symbol for the next event (e.g. at work)
will now flash, allowing you to set the time and temperature for this
period of the day by repeating steps 6-12.
12 Once time and temperature have been set for the four events appli-
cable for the 5-day period Monday to Friday, Exit will flash.
13 Press the OK button. The next 2 days, Sat Sun, will then flash.
Please note that now only two events (Day and Night) are displayed.
14 Press the OK button. The symbol for the first event will flash.
15 Set the time and temperature for this event, and for the following
event, by repeating steps 6-12.
16 Finally, select Exit to exit the Program for a 5:2 schedule
SET TEMP
PROGRAM
Quick Set Temperature
I want to permanently change the temperature for the event cur-
rently active in the automatic program.
To do so, you must:
1 Press the Up or Down buttons to set the required temperature for the
event currently active.
2 Press the OK button.
The new temperature setting will then be saved and used for this event in
the future.
Example: If you change the temperature on a Tuesday morning while the
thermostat is running a 5:2 program, the new temperature will apply to all
mornings from Monday to Friday.
Adaptive Function
I want to ensure that the required temperature has already been
reached when I get up in the morning or come home from work.
To do so, you must activate the adaptive function:
1 Press the OK button to activate the menu.
2 Press the Up or Down buttons until the Settings option flashes.
3 Press the OK button.
4 Press the Up or Down buttons until the Adaptive option flashes.
5 Press the OK button. On or Off will now flash in the upper part of the
display.
6 Press the Up or Down buttons until On flashes.
7 Press the OK button.
8 Select Exit to exit the option.
Please note: The adaptive function is only related to the 4-event program
and only works in connection with going from one event to another where
the temperature is going to be raised.
All manuals and user guides at all-guides.com
EXIT
SAT SUN
© 2011 OJ Electronics A/S
The adaptive function calculates when the thermostat must start the
heating system to ensure that the required temperature is reached at the
set time. Three days after the adaptive function has been activated, it
has learned when the heating must be switched on to attain the required
temperature.
Factory setting: ON
TIME
DAY
CHILDLOCK
SETTINGS C°/F°
APPLICATION
OFFSET TEMP
READOUT
ADAPTIVE
DISPLAY
FACTORY RESET
EXIT
Manual Mode
I want to temporarily cancel the automatic 4-event program and
manually select temperature.
To do so, you must use manual mode:
1 Press the OK button to activate the menu.
2 Press the Up or Down buttons until the Mode option flashes.
3 Press the OK button.
4 Press the Up or Down buttons until Man. mode flashes in the upper
part of the display. The temperature will begin to flash.
5 Press the Up or Down buttons until the required temperature flashes.
6 Press the OK button.
Please note: This feature can be useful for instance if you are going on
holiday and want to maintain a frost protection temperature (e.g. 41°F)
while you are away.
To return to the automatic 4-event program, you must select Auto. Please
refer to page 2 for instructions.
MAN. MODE
MODE
Temporary Override
I want to temporarily set a comfort temperature for a single
event, e.g. because I am not at work one day and want to main-
tain a higher temperature or because I am having a party.
To do so, must use override mode:
1 Press the OK button twice to activate the menu.
2 Press the Up or Down buttons until the Mode option flashes.
3 Press the OK button.
4 Press the Up or Down buttons until Override flashes in the upper
part of the display. The temperature will begin to flash.
English
3