Hansgrohe Metris S 31460000 Instructions De Montage page 21

Important! The fitting must be installed, flushed
and tested after the valid norms!
Assembly
1. Flush through the supply pipes.
2. Mount the S - unions and align them.
3. Fasten the mixer with the washers.
The hot and cold supplies must be of equal
pressures.
Assembly
The mixer is activated by lifting the lever handle.
Turning to the left = warmer water,
turning to the right = cooler water.
31460000/31464000 The flow is changed from
bath to shower function by pulling the knob at the
upper side of the spout. After shutting off the
water flow, the mixer returns automatically to the
bath function.
Technical Data
Operating pressure:
Recommended operating pressure:
MPa
Test pressure:
(1 MPa = 10 bars = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Centre distance:
Connections G ½":
All manuals and user guides at all-guides.com
max. 1 MPa
0,1 – 0,5
1,6 MPa
max. 80° C
65° C
cold right - hot left
English
To adjust the hot water limiter on single lever
mixers, please see page 7.
No adjustment is necessary when using a
continuous flow water heater.
Hansgrohe single lever mixers can be used
together with hydraulically and thermically
controlled continuous flow heaters if the flow
pressure is at least 0,15 MPa.
Important!
The non return valves must be checked regularly
according to DIN EN 1717 in accordance with
national or regional regulations (at least once a
year).
Spare parts see page 4
1 handle
1.1 screw cover
2 flange
3 nut
4 cartridge cpl.
5 flange 31460000/31660000
6 S-union 31460000/31660000
7 aerator cpl.
8 selector assy
9 diverter knob
10 non return valve
11 locking screw for handle
12 nut
13 sleeve
31093000
96338000
97406000
97209000
92730000
96467000
91440000
13914000
94077000
96466000
94074000
96059000
96157000
97738000
5