Panasonic KX-TS710EX Manuel D'instructions page 10

All manuals and user guides at all-guides.com
TS710EX(e).book Page 10 Wednesday, May 21, 2008 10:37 AM
Useful Information
Problem Cause/solution
Other party cannot hear L The application software you want to use with
you.
L The USB cable is not connected properly to the
L Make sure that your computer audio device's
L If the status indicator is red, press {T} to turn
L The unit may not be selected as the audio
L The unit may not work properly depending on
The status indicator is L Unplug the USB cable from the computer and
flashing red.
The status indicator is L Make sure the USB cable is properly connected
OFF.
L The computer is turned off or in suspend mode.
10
the unit was started before installing the unit.
Please restart the application software.
unit and your computer. Connect it.
recording volume is set to the maximum.
the microphone-mute off.
device of your computer. Please confirm the
setting of your computer as follows.
Example: Windows XP
1
Click "start", then click "Control Panel".
2
Click "Sounds, Speech, and Audio Devices".
i Click "Sounds and Audio Devices". i
Click "Audio" tab.
3
Make sure that the default device of "Sound
recording" is "Panasonic KX-TS710".
the power supply of your computer's USB port. If
this is the case and your computer has multiple
USB ports, we recommend that you try other
USB ports.
the unit, then reconnect it. If the status indicator
is still flashing red, there may be a problem with
the unit. Contact the Panasonic service
personnel.
to the unit and your computer.