Télécharger Imprimer la page

Black & Decker HX290 Mode D'emploi page 6

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
• Connect the blue lead to the neutral
terminal
• If the product is class I (earthed),
connect the green/yellow lead to the
earth terminal
Warning! If your product is class II double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth
terminal
• Follow the fitting instructions supplied
with good quality plugs
• Any replacement fuse must be of the
same rating as the original fuse supplied
with the product
Mode setting:
The fan heater incorporates a rotate on
switch you can select the di erent air by
turning the switch clockwise to:
0
O
Fan only
I
Warm air
II
Hot air
Thermostat
When heating mode is selected
• Turn the thermostat knob in a clockwise
direction to the max position.
• Once the room has reached the desired
temperature, turn the thermostat knob
slowly in an anti-clockwise direction until
a "click" sound is heard. That is the
setting temperature. Now, the
thermostat is switched o .
• The thermostat will automatically
maintain the set temperature. It will
switch on when the room temperature is
below and switch o if above the
setting.
6
All manuals and user guides at all-guides.com
• The indicator lamp shows that heating
Use
Your appliance is fitted with a thermostat
for your safety. Using the appliance
continuously for very long periods may
cause the appliance to overheat and stop
working. It is therefore recommended that
you disconnect the appliance from the
mains supply and allow to fully cool before
continuing use.
1. Place the appliance on a flat, stable
2. Connect it to the electricity supply.
3. Select the operating mode.
4. Set the thermostat to the required
Maintenance & cleaning
• Switch the appliance off then remove the
• The appliance is easier to clean if you do
• Do not use abrasive cleaning agents,
• Clean the motor unit with a damp cloth.
Technical data
Voltage
Supply
Power consumption
Weight
mode is switched on.
surface.
setting.
plug from the power socket.
so immediately after use.
scourers, acetone, alcohol etc. to clean
the appliance.
Never immerse the motor unit in water
nor rinse it under the tap.
HX290
220 – 240 Volts
50 Hz
2000 W
1.5 Kg

Publicité

loading