Télécharger Imprimer la page

NOMA 052-9500-2 Guide D'utilisation page 2

Publicité

Les langues disponibles

Les langues disponibles

OSGOODE FOLDABLE 6-LIGHT TRACK FIXTURE
model no. 052-9500-2 | contact us: 1-866-827-4985
ELECTRICAL INSTALLATION:
1) Place the wall switch to the "OFF" position.
NOTE:
Shutting off a wall switch that controls the light is not
sufficient to prevent electrical shock.
WARNING:
CONSULT A QUALIFIED ELECTRICIAN TO
ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
INSTALLATION
1) Attach the mounting strip [6] to the outlet box [1] using the outlet box screws [7] to secure it.
2) To install your new light fixture, attach the white wire from the house to the white wire [5] from the fixture, using one of
the included wire connectors [3]. Then attach the black wire from the house to the black wire [2] from the fixture the
same way. Then attach the green ground wire [4] (or bare copper wire) from the house to the bare grounded wire of the
fixture.
3) Put in place the canopy [9] making sure all wires are secure inside the canopy [9].
4) Screw in decorative nut [10] to secure canopy to the mounting strip [6].
5) Screw the bulb [11] into the socket [13] using the bulb installation tool [12]. Repeat for each socket [13].
6) Turn the power back ON and test the fixture.
!
CAUTION:
1. Cleaning: Before cleaning your lamp, turn off the switch or power source. Wipe the lamp with a soft, damp cloth.
This Noma
product carries a one (1) year warranty against defects in workmanship and materials. Noma Canada
®
agrees to replace a defective product, within the stated warranty period, when returned to the place of purchase
with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse.
MADE IN CHINA
Imported by Noma Canada
Toronto, Canada M4S 2B8
Retain carton for storage purposes
2) Depending on which type of fuse box you
have in your home: Place either the main
(Master) switch to the "OFF" position,
cutting off power to your entire home,
OR turn off the individual switch that
provides power to where the fixture
will be installed.
OR
3) Place either the main (Master) switch
to the "OFF" position, cutting off power
to the entire home, OR unscrew the fuse
that provides power to where the fixture
will be installed.
Instruction Manual
For indoor use

Publicité

loading