Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

500 W HALOGEN WORK LIGHT
model no. 052-4080-0 | contact us: 1-866-827-4985
ASSEMBLY INSTRUCTIONS
1) Fasten the grill guard to the light head:
a. Unscrew the face plate from the housing. [Fig. 1]
b. Insert the grill guard between the face plate and
the glass lens. [Fig. 2]
c. Screw the face plate back to the housing. [Fig. 3]
2) Insert the base tube into the handle tube as
indicated and attach with lock nut provided.
1. Handle
2. Handle tube
3. Lamp housing
4. Grill guard
5. Face plate
6. Base
7. Lock nut
IMPORTANT:
Please read this manual carefully
before assembly and save it for reference.
BULB INSTALLATION
1) Remove top face plate attachment screw.
2) To open, pull face plate down.
3) To remove old bulb, push light bulb to the right and pull out.
4) Place right end bulb on right socket, then insert left end onto left socket.
5) Secure face plate back in place.
CAUTION: LAMP BECOMES HOT WHEN IN USE.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, EXCESSIVE UV RADIATION OR PERSONAL INJURY:
1. Turn off, unplug, and allow unit to cool down before replacing light bulb.
2. Lamp gets hot very quickly! Touch only the switch when turning on. Do not touch hot lens, guard, or enclosure.
3. Do not remain in front of light if skin feels warm. Do not look directly at lamp.
4. Keep lamp away from materials that may be affected by heat.
5. Use only with the maximum bulb wattage suggested or less.
6. Do not touch bulb with bare hands. If unavoidable, use a soft dry cloth and wipe off oil from skin.
7. Do not use lamp with missing or damaged parts.
8. When using the portable work light outside, basic safety precautions should always be followed:
a) Use only with three-wire outdoor extension cords that have two prongs and ground pin.
b) Ground Fault Circuit Interrupter (GFCI) protection should be used on the circuit(s) or outlet(s) when used in wet locations.
c) Use only with an extension cord for outdoor use: SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW-A, SJOW,
SJOW-A, SJTW, SJTW-A, SJTOW, or SJTOW-A.
MADE IN CHINA
Imported by Noma Canada
Toronto, Canada M4S 2B8
All manuals and user guides at all-guides.com
1
2
7
For indoor and outdoor use
Retain carton for storage purposes
3
4
5
6
Instruction Manual

Publicité

loading

Sommaire des Matières pour NOMA 052-4080-0

  • Page 1 For indoor and outdoor use Retain carton for storage purposes 500 W HALOGEN WORK LIGHT model no. 052-4080-0 | contact us: 1-866-827-4985 ASSEMBLY INSTRUCTIONS 1) Fasten the grill guard to the light head: a. Unscrew the face plate from the housing. [Fig. 1] b.
  • Page 2 Pour usage intérieur et extérieur Conservez l'emballage à des fins d'entreposage LAMPE DE TRAVAIL À HALOGÈNE DE 500 W de modèle : 052-4080-0 | contactez-nous : 1 866 827-4985 CONSIGNES D'ASSEMBLAGE 1) Fixer les grilles protectrices sur les têtes des lampes : a.