Geemarc CL Bluehook Manuel D'utilisation page 6

INSTALLATION
Set the CL Bluehook to power-on mode (press
Multifunction Speaking Button for 5 seconds until the
BLUE LED flashes every 3 seconds)
Ensure there are no other Bluetooth devices in pairing
mode within a 10 metre range of the CL Bluehook
Press and hold VOL+ and VOL-simultaneously for about
3 seconds until the BLUE and RED LED flash alternately.
You are now in waiting mode.
Select Bluetooth for the connectivity type on your mobile
phone
Set the mobile phone to search and add a new paired
device (see mobile phone user guide).
N.B. When the mobile phone finds the CL Bluehook, it
may appear as BT019 in the list of paired devices – this
is ok.
9
INSTALLATION
On finding the the CL Bluehook, the mobile phone will
ask for an input ID code. Enter the PIN code of "0000"
The BLUE LED should now flash slowly to indicate
successful pairing.
The CL Bluehook is now in standby and can be used as
required.
10