Delayed Start - Beko WTA 7612 XSW Manuel D'utilisation

4.3.10.2 Functions/Programmes
Selected by Pressing the Function
Buttons for 3 Seconds
• Drum Cleaning
Press and hold the auxiliary function button 1
for 3 seconds to select the programme. Use
regularly (once in every 1-2 months) to clean
the drum and provide the required hygiene.
Steam is applied before the programme to
soften the residues in the drum. Operate the
programme while the machine is completely
empty. To obtain better results, put powder
lime-scale remover for washing machines into
the detergent compartment no. "2". When the
programme is over, leave the loading door ajar
so that the inside of the machine gets dry.
C
INFORMATION
• This is not a washing programme.
It is a maintenance programme.
• Do not run the programme when there
is something in the machine. If you try to
do so, the machine detects that there is
load inside and aborts the programme.
• Child lock 3''
Use Child Lock function to prevent children
from tampering with the machine. Thus you can
avoid any changes in a running programme.
C
INFORMATION
• If the Programme Selection knob is
turned when the Child Lock is active,
"Con" appears on the display. The
Child Lock does not allow any change
in the programmes and the selected
temperature, speed and auxiliary functions.
• Even if another programme is selected
with the Programme Selection knob
while the Child Lock is active, previously
selected programme will continue running.
17 / EN
To activate the Child Lock:
2. Pres and hold the Auxiliary Function button
for 3 seconds. C03, C02, C01 will appear on
the display respectively while you keep the
button pressed for 3 seconds. Then, while
the light of the Auxiliary Function button 2
is flashing, "Con" will appear on the display
indicating that the child lock has been activated.
If you press any button or turn the Programme
Selection knob when the Child Lock is active,
same phrase will appear on the display.
To deactivate the Child Lock:
Press and hold the Auxiliary Function button 2
for 3 seconds while a programme is running.
C03, C02, C01 will appear on the display
respectively while you keep the button pressed
for 3 seconds. Then, while the light of the
auxiliary function button 2 is flashing, "COF" will
appear on the display indicating that the child
lock has been deactivated.
C
INFORMATION
• In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On / Off
position when no programme is running,
and select another programme.
• Child Lock is not deactivated after power
failures or when the machine is unplugged.

4.3.11 Delayed Start

With the Delayed Start function the startup
of the programme may be delayed up to 19
hours. Delayed start time can be increased by
increments of 1 hour.
C
INFORMATION
• Do not use liquid detergents when
you set Delayed Start! There is the
risk of staining of the clothes.
1. Open the loading door, place the laundry
and put detergent, etc.
2. Select the washing programme,
temperature, spin speed and, if required,
the auxiliary functions.
3. Set the desired time by pressing the
Delayed Start button.
Washing Machine / User's Manual