LEXIBOOK BT910 Serie Mode D'emploi page 20

1. Turn the unit on, then press MODE button repeatedly until selecting the AUX in
mode. Once selected, the AUX in indicator will light up.
2. After connecting the AUX in cable to your audio device and speaker system,
press the play button on your audio device to play music.
Microphone
With Bluetooth® Sound Tower you can sing the songs by connecting a microphone
(not included) to the unit under Aux in, Bluetooth®, USB or SD/MMC mode.
1. Insert the end of your microphone cable to the microphone in jack on the back
of the Sound Tower.
2. Press POWER/MODE button to turn the unit on, then press it again repeatedly
on the top panel or on the remote control to choose the mode you want.
3. Turn the Microphone volume control knob to adjust the volume level of the
microphone.
Note: The microphone has to be a 3.5mm condenser microphone.
Then you can place it on the mic holder located at the rear of the tower.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Lexibook® is under license. Other trademarks
and trade names are those of their respective owners.
© 2016 Bluetooth SIG, Inc.
Your audio player must support the A2DP Bluetooth® profile to match this Sound Tower.
Please refer to your audio player's instruction manual for accurate information about the
Bluetooth® profiles it supports, and how to set up Bluetooth® pairing.
Initial Pairing
1. Turn the unit on, then press MODE button and select Bluetooth® mode. The
blue indicator of the Bluetooth® mode will flash to indicate that Bluetooth®
mode is effective.
2. Activate the Bluetooth® function on your personal device and make sure it is in
discoverable mode.
3. Confirm pairing or select the Bluetooth® name "BT910" to connect your player
to the speaker.
4. If pairing is successful, a signal tone will sound, the Bluetooth® light will stop
flashing and glow steadily. You can play an audio or a video file. Adjust the
sound volume level using the keys on your personal device or the volume
buttons of the tower.
5. To stop the connection with the speaker, press another mode on the top panel
or a button on your audio player. Once the connection has been stopped, the
LED indicator will flash.
BT910seriesIM1176_101_V19.indd 20
All manuals and user guides at all-guides.com
®
BLUETOOTH
20
SET UP
28/4/16 6:32 pm