LEXIBOOK BT910 Serie Mode D'emploi page 15

18. Do not attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
19. Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in proper
operating condition.
20. Batteries shall not be exposed to excessive heat such as sunshine, fire or the
like.
21. Attention should be drawn to the environmental aspects of battery disposal.
22. Use the apparatus in moderate climates. (Work temperature 0˚C~ +40˚C)
23. The socket-outlet shall be installed near the equipment and must be easily
accessible.
24. The AC/DC adaptor should not be obstructed OR should be easily accessed
during intended use.
25. To completely disconnect the power input, the AC/DC adaptor shall be
disconnected from the mains, as the disconnecting part is the AC/DC adaptor.
26. The apparatus and AC/DC adaptor shall not be exposed to dripping or
splashing and no objects filled with liquids , such as vases, shall be placed
near them.
27. At full power, listening to a music player for prolonged periods can damage the
user's hearing.
When unpacking, ensure that the following elements are included:
1 x Bluetooth® Sound Tower with microphone holder
1 x Remote control
1 x 3.5mm AUX in cable
1 x AC/DC adapter
1 x Instruction manual
2 x Screws and washers
1 x Base stand
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and
tags are not part of this product and should be discarded.
The Bluetooth
AC operation
1. Check that the unit is switched off.
2. Insert the small end of the AC adapter into the DC IN socket at the back of the
unit.
3. Plug the other end of the AC adapter into any convenient AC~100-240V,
50/60Hz power outlet. When plugged in, the power indicator lights up in red.
BT910seriesIM1176_101_V19.indd 15
All manuals and user guides at all-guides.com
UNPACKING THE DEVICE
POWER SOURCES
®
Sound Tower operates on AC~100-240V, 50/60Hz.
15
28/4/16 6:32 pm