Publicité
Les langues disponibles
Les langues disponibles
Product Features
Product Overview
3.
1.
2.
5.
1.
Air supply
2.
Lid
3.
Control panel
4.
Air grille
5.
Housing
6.
Cable storage
Technical Data
Dimension
39.6 x 23.7 x 42.6 cm
Weight
3.7 kg
Color
Black
Gas cyclopentane
C5H10, polypropylene
Material
(PP), polyethylene (PE),
acrylonitrile butadiene
styrene (ABS)
AC: 1.6 m
Cord length
DC 12 V: 1.9 m
AC: 0-240 V
AC
DC 12 V: 12/24 V
AC: 1.2 A 0.5 A
DC
DC 12 V: 5.0 A/2.5 A
14
8.
7.
4.
6.
9.
11.
7.
Lid
8.
Fan cover
9.
Seal
10.
Storage
11.
Handle
AC = warm: 52 W /
cold: 58 W / ECO: 8 W
(ECO mode can only be
Power
used with a 230 V power
supply)
DC 12V = hot: 40 W /
cold: 48 W
IP number
IPX0
Min/max user
-20˚C to 20˚C
temperature
48 dB (35 dB in ECO
Noise level
mode)
Operating
0 to 55˚C
temperature
Storage Temperature
Operating humidity
Storage humidity
Capacity
Walls: HIPS (High Impact
Refrigerant type
Polystyrene) Refrigerant:
10.
Climate type
Other Features
-
Thermoelectric, i.e., cooling and heating;
-
Cooling to 18˚C lower than outside temperature;
-
Heating up to 55˚C;
-
Suitable for 12 V and 230 V connection (suitable for car, boat, camping, home);
-
Eco mode;
-
With handle.
Operation Instructions
First time use
-
In general, two types of power supplies can be used to power the product (products with certain specifi-
cations may differ, refer to the product nameplate for specific power supply specifications).
Alternating current
-
Remove all packaging items, including the foam pads on the bottom of the product and the foam pads
and tape (if any) used to keep accessories in the box.
Power on and function settings
1.
Make sure the product function switch and the power switch are in the "OFF" position.
2.
Refer to the instructions for electrical connection. Plug in the power cord and turn on the power.
3.
Turn the mode switch to the Max position (ECO mode is an energy-saving mode, cooling performance
is not good. Some models do not have this mode).
4.
Turn the mode switch to the cold or hot position. The light comes on (green means cold, red means
hot). You will hear the fan working and the cooler is now operating.
-
COLD: The cooling function is on, the green indicator light is on.
-
OFF: The unit is turned off.
-
HOT: The heating function is on, the red indicator light is on.
-20˚C to 20˚C
Cooling capacity
Less than 25˚C: >75%.
Less than 25˚C: >75%.
Fuse type
20 L
Energy consumption
R600a
Refrigerant charge
Sn. / N. / St. / T
Direct current
-20˚C to 20˚C (max. 20
degrees difference from
outside temperature)
DC: 12v: 1-20A
AC: <200A
60 Wh
Walls: HIPS (High Impact
Polystyrene) Refrigerant:
R600a
15
Publicité
