Atleisure FRN-300500 Instructions D'assemblage Et D'entretien page 4

Assembly for Table
CAUTION: Do not use sharp tools to remove the protective
material, as it may damage the product.
Step 1: Connect upper leg (F)
with bottom leg (G) using bolt (C),
washer (A), and hex wrench (D).
Do not tighten all bolts until last step.
Step 3: Place fully assembled unit on flat surface to level product. Once
leveled, tighten all bolts. Adjust the leveling feet (H) on the bottom of each piece
as necessary.
Care and Maintenance
CARE INSTRUCTIONS:
• All outdoor furniture is subject to UV rays and weather elements. In order to
keep your furniture vibrant, simply clean with mild soap and water. Rinse and dry
thoroughly.
• We suggest using furniture covers or storing your furniture when not in use.
Step 2: Attach upper leg (F) with
bottom leg (G) to table top (E) using a
bolt (B), washer(A), and hex wrench (D).
Do not tighten all bolts until last step.
H
4
E