Atleisure FRN-300500 Instructions D'assemblage Et D'entretien page 3

Assembly for Chair
CAUTION: Do not use sharp tools to remove the protective
material, as it may damage the product.
Step 1: Attach the base (E) to the seat (D) with bolts (B), washer (A), by hex
wrench (C). Do not tighten bolts until last step.
F
Step 2: Place fully assembled unit on a flat surface to level product. Once
leveled, tighten all bolts. Adjust the leveling feet (F) on the bottom of each piece
as necessary.
E
3