Kucht Professional KMD24S Guide D'installation page 6

DRAWER INSTALLATION
A
PARTS SUPPLIED
B
4 Screws
1. Place the drawer adjacent to the wall or cabinet opening. Plug
the power supply cord into the electrical outlet.
2. Carefully guide the drawer into the prepared opening. Avoid
pinching the cord between the oven and the wall.
3. Slide the drawer all the way until the mounting flange is flush
with the face of the cabinet. See figure 5A.
4. Open the drawer. Using the 4 holes on the drawer as a template,
pre drill the cabinet using a 1/16" bit. See figure 5A.
5. Secure the drawer with the 4 screws supplied. See figure 5B.
6
TINSKB307MRR0_Kucht_24" Drawer KMD24S Install Guide.indd 6 TINSKB307MRR0_Kucht_24" Drawer KMD24S Install Guide.indd 6
Mounting Screws
FIGURE 5
MODEL AND SERIAL NUMBER
LOCATION
The nameplate includes model number and serial number. Open
the Drawer Microwave fully. The label is slightly beyond the
back wall of the microwave cavity facing up from the flat surface.
CARE, CLEANING AND
MAINTENANCE
Refer to the User Manual for cleaning instructions.
BEFORE YOU CALL FOR SERVICE
Read the BEFORE YOU CALL FOR SERVICE and operating
instruction sections in your User Manual. It may save you time
and expense. The list includes common occurrences that are not
the result of defective workmanship or materials in this Drawer
Microwave.
For more details and information, please visit our website www.
Kucht.Com.
E
10/2/20 11:15 AM 10/2/20 11:15 AM