ETQ TG52T42 Guide D'utilisation page 15

ETQ
EASTERN TOOLS & EQUIPMENT INC
saw
1 ½ HP air compressor
Note: wattages listed are only approximates. Check
your electrical device for actual wattage.
STOPPING THE ENGINE
• Turn the AC circuit breaker to the "OFF"
position (Figure 1).
Figure 1.
• Unplug all the electrical loads from the
generator panel (Figure 2).
Figure 2.
• Let the engine run at no-load for several
minutes to stabilize the internal temperatures
of engine and generator.
• Turn the engine switch to the "OFF" position
(Figure 3).
Figure 3.
Tel: (888)908-6200
2500 2500
• Turn the fuel valve to the "OFF" position
(Figure 4).
12
Web Site: easterntools.com
Figure 4.