Jya Fjord Air Purifie Mode D'emploi page 4

How to Use
Turning On/Off
Tap the power button to turn on the purifier. While
the purifier is on, tap the power button to turn it off.
Display Instructions
After power on, the main screen will rotate in the main interface of PM2.5, PM10, TVOC in turn.
PM2.5 Interface
Air Quality Indicator
The indicator will display green, yellow, orange or red
according the worst value of PM2.5、TVOC、 PM10.
Note: PM10 refers to coarse particles have an aerodynamic
diameter ranging from 2.5 to 10μm (PM10–PM2.5). Examples of
coarse particles include dust, pollen, spores, and fly ash.
Note: Upon activation, the Gas sensor inside this purifier takes
the air quality as the initial standard value. If there are changes
in the air TVOC during operation, the Gas sensor will perform
calculations based on the current indoor air quality (IAQ). The
TVOC is displayed according to 4 different levels, and the air
quality indicator status also changes accordingly.
PM10 Interface TVOC Interface
1-20 μg/m Excellent
PM2.5 3
21-35 μg/m Good
3
35-55 μg/m Moderate
3
＞ 55 μg/m Unhealthy
3
PM10 Excellent
Good
Moderate
Unhealthy
TVOC Excellent
Good
Moderate
Unhealthy
05
How to Use
Screen operation
Swipe Rignt
Temperature and
Humidity Interface
Main Screen
Press on the main screen to quick
switch the 4 operation modes.
In the "Operation Modes" interface, the highlighted state mode is the current operating
mode, click to select the corresponding mode.
Automatic: Automatically switch modes according to
the indoor air quality.
Sleep: Ultra-low noise for a comfortable sleeping
environment.
06
Operation Modes Filter lifespan remaining Screen brightness
and filter resetting adjustment
Wi-Fi settings UV light on/off setting
Swipe Left
Function Settings
Interface
Swipe left on the main screen to enter the
five setting interfaces in sequence, and
return to the main screen after 10 seconds
of no operation.
Tip: After the screen is off, press the screen to wake up
Favorite: Set and save the coverage area and the
purifying efficiency in the app.
Power: The device will run with the maximum speed and
output the maximum amount of clean air.