RHINO WINCH Co Mode D'emploi page 3

3000lb - 4500lb
Quick start guide
Mounting
CAUTION: To prevent serious injury due to accidental activation, complete
the winch installation before wiring.
WARNING: Always choose a mounting location that is sufficiently strong
to withstand the winch pulling capacity.
WARNING: Always spool the winch rope onto the drum in the direction
specified in the documentation.
This winch should always be mounted in a horizontal orientation with
the rope winding on / off the bottom of the drum. This ensures that the
automatic brake will function correctly and it helps prevent the rope from
bunching on one end of the drum. Bunching can damage the winch.
Wireless Remotes
• Before you begin, you should familiarize yourself
with the wireless remotes.
• The remotes should be turned off when not in use.
• The battery is located in the back of the remotes.
• Be careful to keep your remotes away from water.
Freespool operation
Rotate the clutch to the "free spool"
position. Re-engage the drum by
returning the clutch knob to the
"engaged" position.
If the drum rotates in the wrong
direction when in use, check your
wiring. Ensure that at least five turns of
wire cable / ten turns of synthetic rope
are left on the drum at all times.
All manuals and user guides at all-guides.com
Clutch type Freespool Operation
Pull and
Push
Rotate
© Rhino Winch Co
English
ON/OFF
Indicator light
Winch In
Winch Out
Controls
ON/OFF
Button
CAUTION
•
Never engage
clutch knob while
drum is turning.
•
Always discontinue
power supply if the
motor stalls.
•
Always fully engage
the clutch before
winching.
•
Never use
excessive force on
the clutch handle.
If it's hard to turn
under load, release
some tension first.
3