ALFRA ROTABEST V 32 Mode D'emploi page 16

Please note, the magnet adhesive force fails, if the power supply is
disconnected (power breakdown, taking out the power plug).
For extending the durability of the core drills, attach the coolant units with hose to the
flexible nipple on the V32 and only use a coolant with an adequate viscosity. The
drilling core will be cooled down and won't be stuck in the core drill.
Please note, when drilling with a material thickness of under 6 mm you need to
inferior a steel plate of adequate strength to ensure the full magnetic adhesive
force of the magnet foot.
9. Switching on and off
Check supply voltage.
• Check connecting line and plug on damages first!
• Push the red bottom
adhesion is guaranteed.
• Push the green bottom
• To switch off machine proceed in reverse order
red bottom left = motor off
red bottom right = magnet off
• When working on walls and ceilings, safe machine with safety belt.
All manuals and user guides at all-guides.com
, in order to initiate the magnet and the magnetic
to start the motor.
5