eufy Security E340 Guide De Démarrage Rapide page 7

Install the Doorbell
Align the doorbell with the bottom of the mounting bracket,
then press the top of the doorbell into place until it clicks.
Recharging the Battery
1. Insert the detaching pin into the pin hole on the top of
the doorbell, then lift the top for removal.
2. Repeat steps in "CHARGING THE BATTERY PACK".
You can purchase an extra battery pack for quick replacement.
10 EN
DOORBELL MOUNTING
(Wire Powered)
Check the Doorbell Wires
1. Ring the existing doorbell to check if it is working. If
it doesn't ring, your doorbell wires may be defective.
Power on the doorbell by the built-in battery or consult an
electrician to repair the wires.
2. Shut off the power at the circuit breaker. Turn the lights
on and off to make sure the electricity in your home is
properly shut off.
OFF
OFF
Always be careful when handling wires. If you're not comfortable
installing it yourself, have a qualified electrician to do it.
EN 11