Fitting The Gate - Gaterol Active Lite Mode D'emploi

Measure the thickness of the baseboard and use with the suitable spacers.
Baseboard
Wall hook
Locking hook
Mount the hook and the spacers on the wall or frame with the screws (P) and use the
wall plugs (Q) if necessary.
Setup inside an opening

4. Fitting the Gate

Align the markings on the
gate to the arrow shown
on the upper
hook.
<7 mm 8-10 mm
<0.30 in 0.31-0.42 in
K L
N O
Lock
Snap the gate in the place
until you hear a clicking
locking sound.
11-13 mm 14-16 mm
0.43-0.54 in 0.55-0.66 in
J+L
M+O
Setup in front of an opening
8
17-20 mm
0.67-0.78 in
K+L J+K+L
N+O M+N+O
Unlock
To release the gate from
the upper locking hook,
push the latch towards the
wall and pull the gate up
to release.