DeLOCK 64187 Mode D'emploi page 2

English
Description
This docking station by Delock enables an external connection of up to two 2.5"
or 3.5" SATA HDDs or SSDs through the USB interface. This solution does not
require an external enclosure since the drive can be plugged into the docking
station directly.
Clone and erase function
The clone function enables to copy the content of one HDD to another without
using a PC. No connection to the computer is required for the erase function.
Selectively one drive or two drives can be deleted at the same time.
Specification
• Connectors:
1 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-B female
2 x SATA 6 Gb/s 22 pin receptacle
1 x DC jack
• Chipset: Asmedia ASM1156
• Function key:
1 x Clone button
1 x Erase button
1 x On / Off switch
• For 2.5" and 3.5" SATA HDD / SSD
• Suitable for all SATA HDDs up to SATA 6 Gb/s
• Data transfer rate up to 5 Gbps
• LED indicator for power, access and copy / erase status
• Dimensions (LxWxH): ca. 153 x 110 x 62 mm
• Plug & Play
Power supply specification
• Wall power supply
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.5 A
• Output: 12.0 V / 3.0 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
-2-