Publicité
Les langues disponibles
Les langues disponibles
Set the Alarm 1
•
During DAB/FM/AUX-IN mode, short press the ALARM/SNOOZE button, "Alarm1 Time Set" is
shown on the display, meanwhile, the hour digits flashes on the display.
• Press > or < button to adjust the hour, then press PLAY/ENTER to confirm the hour, the hour digit will
stop flashing and the minute digit will start flashing.
•
The Alarm1 Time Set prompts you for the following parameters. Select a value for each parameter
in turn by using > or < button and then press PLAY/ENTER to confirm and move on to the next
parameter.
Alarm Parameters:
• On time – hours and minutes
• Alarm Mode – Once |Daily | Weekends | Weekdays, choose the days on which the alarm is active.
• Alarm Type (Source) – DAB | FM | BEEP Tone1 | BEEP Tone2, If DAB or FM is chosen as the audio
source you will also be prompted to select the last played station or one of the preset stations (if set).
Set the Alarm 2
•
During DAB/FM/AUX-IN mode, short press the ALARM/SNOOZE button twice until the "Alarm2
Time Set" is shown on the display, meanwhile, the hour digits flashes on the display.
•
The other setting of Alarm2 refers to Alarm1 setting described above.
• At the set time, the alarm will sound, quietly at first, then gradually building up to the set volume.
When an alarm sounds, the bell icon in the display flashes.
•
To cancel the Alarm when it is activated, press PLAY/ENTER button, the unit goes to standby.
Snooze
•
When the alarm is activated (waking you), short press the ALARM/SNOOZE button will stop the
alarm one time. The Snooze icon will show on the display.
•
The alarm will sound again after 9 minutes (default nap time).
Arming and Disarming Alarms (Turn Alarm Function On and Off)
• Rotate the ALARM on/off switch to ON position to turn the alarms ON, the alarm icons will appear
on the display.
• Rotate the ALARM on/off switch to OFF position at any time to turn the alarms OFF, the alarm
icons will disappear
Notes:
The alarms will not be activated if the unit is set on Bluetooth mode, to ensure the alarm function works
properly, make sure that the Function switch is not set at Bluetooth position before turning off the unit.
If the DAB or FM alarm type is selected, the alarm will turn on and broadcast the last channel before
turning off the unit.
How to enter this submenu
•
Press MENU button during any operating mode
• Press ">" or "<" button" to select different submenu
•
Press PLAY/ ENTER button to enter the submenu
•
Press ">" or "<" button" to select & press PLAY / ENTER button to confirm the setting.
Language Set: The language used for display messages can be selected from: English / Deutsch
Factory Reset: A factory reset clears all user defined settings, replacing them with the original default va-
lues, so time/date, DAB/FM station list and preset stations are all lost. If you select Reset, you are asked
to confirm by pressing the ENTER button
SW Version: Press MENU button, then press">" or "<" button to select to display the current software
version.
System settings
18
Publicité
