SKALT Prostop 6 SE Mode D'emploi page 3

ICON EXPLANATION
Ensure that the anchorage point has strength of min 12kN.
Do not aYempt repair unless trained by the manufacturer.
Keep away from sunlight or heavy rains.
To be used by person weighFng up to than 140 kgs. When verFcally used, 100 kg when horizontally used
It can be used on the sharp edges having radius≥0.5mm
Once the wire rope has been reeled out, do not leave it suddenly to retract inside on its own, let it go inside gradually by
guiding it slowly inside.
Use between temperature range of -30 C to +50 C.
0 0
Ensure that the max angle between the verFcal & the lanyard is 40 .
0
Connect the lanyard to the Dorsal aYachment element of your harness.
Can be used for horizontal applicaFons
Don't use anchor point at floor level
Ensure that wire rope or webbing has no cuts or abrasion marks