Philips AZ 1007 Mode D'emploi page 13

SYNCHRO START CD RECORDING
1. Set the source selector to CD.
2. Insert a CD and if desired, program track numbers.
3. Press STOP•OPEN 9 / to open the cassette holder.
4. Insert a blank tape.
5. Close the cassette holder.
6. Press RECORD 0 to start recording.
™ Playing of the CD program starts automatically from the
beginning of the program. It is not necessary to start the
CD player separately.
7. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ; again.
8. To stop recording press STOP•OPEN 9 /
To select and record a particular passage within a track
1. During playback, press and hold down the SEARCH button
∞ or §to find your passage.
2. Press PLAY•PAUSE 2; to put the CD player on pause at the
selected passage.
™ Recording will begin from this exact point in the track
when you press RECORD 0.
RECORDING FROM THE RADIO
1. Set the source selector to RADIO.
2. Tune to the desired radio station (See RADIO RECEPTION).
3. Press STOP•OPEN 9 / to open the cassette holder and
insert a blank tape.
4. Close the cassette holder.
5. Press RECORD 0 to start recording.
Note: If you are recording an AM station, adjust the BEAT
CUT switch to eliminate any whistle noises.
6. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording, press STOP•OPEN 9 /
All manuals and user guides at all-guides.com
CASSETTE RECORDER
13