ExecutiveSafe CS-3B Manuel D'utilisation page 7

Press 1 to Set the User Password.
IVR: "PLEASE ENTER A NEW PASSWORD" Enter a 3 to 8-digit user password
followed by the "#" button.
IVR: "PLEASE ENTER IT AGAIN" Re-enter the same 3 to 8-digit user password
followed by the "#" button. If a mistake is made in entering the password the second
time, the IVR will announce "Wrong input please re-enter" and the correct user
password must be re-entered.
IVR: "SET UP SUCCESS"
The previously programmed user password is now deleted.
The safe will return to the set-up mode waiting for an input "1" to "5" or a "*" to
exit the set-up menu.
Test the password you just programmed with the door open.
Press 2 to Add a Finger Print.
Place your finger on the finger recognition reader and follow IVR Instructions (3
successful readings are required)
IVR: "A SUCCESSFUL REGISTRATION" the finger is programmed and you
can now use your finger to open the safe.
IVR: "PLEASE ENTER IT AGAIN". Re-enter your finger on the finger
recognition reader.
The safe will return to the set-up mode waiting for an input "1" to "5" or a "*" to
exit the set-up menu.
Press 3 to Delete all Programmed Finger Prints.
The Last Finger print programmed cannot be deleted. It can only be deleted by
resetting the safe to the factory defaults.
IVR: "DELETE SUCCESSFUL"
The safe will return to the set-up mode waiting for an input "1" to "5" or a "*" to
exit the set-up menu.
Press 4 to Set (Change) the Administrative (Management) Password.
IVR: "PLEASE ENTER THE ADMINISTRATIVE PASSWORD AND
CONFIRM WITH THE HASH KEY" Enter a 3 to 8-digit Administrative Password
followed by the "#" button.
IVR: "PLEASE ENTER IT AGAIN" Re-enter the same 3 to 8-digit Administrative
Password followed by the "#" button. If a mistake is made in entering the code the
second time, the IVR will announce "Wrong input please re-enter" and the correct
Administrative Password must be re-entered.
IVR: "SET UP SUCCESS"
The previously programmed Administrative Password is deleted.
The safe will return to the set-up mode waiting for an input "1" to "5" or a "*" to
exit the set-up menu.
Test the Administrative Password you just programmed with the door open.
Press 5 to Set (Change) the Opening Mode (Method) of the Safe.
IVR: "Press 1 for common Mode and 2 for Security Mode", Enter 1 for the safe to
open with the common mode or press 2 for the safe to open in the Dual Safe mode.
The safe will return to the set-up mode waiting for an input "1" to "5" or a "*" to
exit the set-up menu.
Press * to Exit the Set-up Mode.