Publicité
Les langues disponibles
Les langues disponibles
CHANGING THE BATTERIES
• 6 AA batteries required
• No screwdriver needed
NOTE: Batteries need changing when sensor
light flashes RED.
1. Open the dispenser by
pushing up on the release
latch (use key if you have
converted to the keyed
locking mode). The latch is
on the bottom back edge in
the center. (See Figure 28)
2. While pushing the release
latch, open the dispenser
by placing your other hand
on the top, and guide the
front cover forward.
(See Figure 29)
3. Flip up cover of battery
compartment in upper right
side. (See Figure 30)
PAGE 4 OF 12
MAINTENANCE
Figure 28
Figure 29
Figure 30
1-800-295-5510
uline.com
4. Unhook battery terminals
and remove battery
pack. Replace all 6
AA batteries with new
batteries. (See Figure 31)
5. Return battery pack
to space and attach
battery terminals.
(See Figure 32)
6. Close dispenser.
(See Figure 33)
Figure 31
Figure 32
Figure 33
0721 IH-3415
Publicité
