Nebula Cosmos Laser Mode D'emploi page 9

Adjust the width and the height proportion of the
Aspect display. You can select from these options: Auto, 16:9,
16:10, 4:3.
Turn High-Dynamic Range on or off. HDR enables the
projector to automatically detect the brightness and
HDR
darkest points of the input source and optimize settings
to reproduce contents under high dynamic range.
Volume Adjust the volume of the built-in speaker.
The projector is preset with several predefined sound
modes so that you can choose one to suit your
environment and input source.
• Standard: Keeps the original sound.
• Music: Enhances the treble for listening to the
music.
Audio Mode
• Movie: Creates a surround-sound listening
experience for watching movies.
• News: Make voices more clear and dynamic for
listening.
• Audio Custom: Manually set audio settings such
as bass, midrange, and treble.
Dolby Adjust the Dolby DRC Mode.
Image Correction
One-Click Focus
and Keystone Automatically focus and perform keystone correction.
Correction
Automatically or manually perform keystone
Keystone
correction. Manual keystone correction is only available
Correction
when auto keystone correction is off.
• Autofocus: Activate or deactivate Autofocus.
Focus • Manual Focus Correction: Manually adjust the
focus.
Screen Zoom Zoom in or out of the projection image.
Activate to automatically adjust the image size to
Auto Screen Fit
your surface.
14
Audio
Input Access Select Android TV or HDMI as the input source.
HDMI 2.0 Auto/Off/On
Check the current system firmware version and the
Projector Info
projector firmware version.
Check our regional hotlines to contact our customer
Contact Us
service team.
Nebula Connect Scan the QR code to install the Nebula Connect app.
Advanced Settings
Language Select your language.
• Front: The device is located in front of the projection
surface.
• Rear: The device is located behind the projection
surface.
• Front Ceiling: The device is hanging from the ceiling
Projector
in an upside-down position. The image is rotated by
Mode
180 degrees.
• Rear Ceiling: The device is hanging from the ceiling
in an upside-down position behind the projection
surface. The image is rotated by 180 degrees and
horizontal mirrored.
Eyesight
Activate or deactivate the eyesight protection function.
Protection
If the picture is still unclear after cleaning the lens,
ToF Calibration
calibrate the Time-of-Flight (ToF) sensor.
Back to Default Restore settings to default.
System Settings
On the remote, press the Settings button to access the setting menus of
the system.
Network &
See available networks.
Internet
HDMI
About
15