Nebula Cosmos Laser Mode D'emploi page 2

English
Deutsch
Español
Français
Italiano
Nederlands
Português
日本語
한국어
繁体中文
‫لع َ ر َ ب ِ ية‬
Important Safety Instructions
Read all instructions before you use this device. Do not make any
changes or create settings that are not described in this manual. If
physical injury, loss of data, or damage is caused by failure to follow
instructions, the warranty does not apply.
01
Setup
• Do not place heavy or sharp objects on this device.
29
• To avoid electric shock, do not disassemble the device.
• Only use attachments or accessories specified by the manufacturer.
• Keep away from any heat sources.
59
• Place in a dry and well-ventilated area.
• Do not place this device on soft surfaces such as tablecloths or
89
• Do not look straight at the projector lens during operation. The
• To prevent overheating, do not block or clog the ventilation openings.
119
• To reduce the risk of fire and/or electric shock, do not expose the
149
• Turn off and remove the cable if this product emits smoke or any
• Unplug from the power source when not in use for a long period of
179
• Always handle the device with care. Avoid touching the lens.
• Do not allow children to handle the device without supervision.
209
• Avoid extreme vibrations. It may damage the internal components.
• The power cord shall connect to socket-outlet with a grounding/
233
• The power supply should be installed near the equipment; for
• Only use the power cord provided by the manufacturer. An
257
• The plug of the power cord is considered as the disconnect device.
279
• Do not use the device in an environment where the temperature is
carpets. The device could catch fire.
intense light beam may damage your eyes.
device to rain or moisture. Objects filled with liquids, such as vases,
should not be placed on this device.
strange odor.
time.
earthing connection.
pluggable equipment, the socket-outlet must be easily accessible.
unauthorized power cord may cause danger and violate the
authorization of the projector as well as the guarantee.
Once unplugged, the projector is disconnected from the power
source.
too high or too low. Never expose the device to strong sunshine or
wet environments.
01