LG LB61 Serie Manuel D'utilisation page 42

18 ASSEMBLING AND PREPARING
CAUTION
Disconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorised LG wall mount and
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this
may cause damage to the TV and void
your warranty.
Use the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an
improper accessory are not covered by
the warranty.
Screw length from outer surface of
back cover should be under 8mm. (only
LB49**)
Wall mount Pad
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Max.8mm
Use the screws that are listed on the
VESA standard screw specifications.
The wall mount kit includes an installation
manual and necessary parts.
The wall mount bracket is not provided.
You can obtain additional accessories
from your local dealer.
The length of screws may differ
depending on the wall mount. Make sure
to use the proper length.
For more information, refer to the manual
supplied with the wall mount.
When attaching a wall mounting
bracket to the TV, insert the wall
mount spacers into the TV wall mount
holes to adjust the vertical angle of
the TV. (Only 42LB57**, 42LB58**)
Back Cover
NOTE
Wall Mount Spacer