Axis Communications P5512-E Instructions D'installation page 13

AXIS P5512–E PTZ Dome Network Camera
For SD card recommendations, see www.axis.com
Specifications
Operating Conditions
Product Classification
AXIS P5512–E IEC 60721-4-3
Class 3K3, 3M3
IEC 60529 IP66
NEMA 250 Type
4X
Power Consumption
NO NOTICE NO TICE TICE
Use a limited power source (LPS) with either a rated output power limited to ≤100 W
or a rated output current limited to ≤5 A.
Product
AXIS P5512–E
Install the Hardware
Read all the instructions before preparing to install the network camera since several installation
preparation steps require removing the top cover and would benefit from being completed together.
• Remove the protective packaging before installing the camera.
• The product is supplied with a clear transparent dome cover (premounted) and a smoked
transparent dome cover. To replace the dome cover, see Replace the Dome Cover on
page 14.
• A standard or high capacity SD card (not included) can be used to store recordings locally
in the product. The sunshield must be removed to install/remove an SD card, see Install
an SD Card on page 15.
• To install the product using a compatible bracket from AXIS T91A Mounting Accessories
(sold separately), see Install the Camera on a Bracket Mount (sold separately) on page 15.
Remove the Protective Packaging
See Hardware Overview on page 10 for location of components.
All manuals and user guides at all-guides.com
Temperature
-20 °C to 50 °C
(-4 °F to 122 °F)
PoE
Power over Ethernet IEEE 802.3af Class 3
13
Humidity
Humidity 15-100% RH
(condensing)