Publicité
Les langues disponibles
Les langues disponibles
For reception of digital radio stations, the antenna must be fully extended.
Turning on the clock radio for the first time
When the clock radio is turned on for the first time, it switches automatically to DAB mode
and starts an automatic search for available stations. A progress bar indicates the progress
of the search:
Recherche
•
At the end of the search, the first station found in alphanumeric order is broadcast.
•
To display the other available stations, press the
DAB station, and then press the
broadcast. The time is set automatically.
•
If no station is received,
"no DAB station"
there is no reception, or only very weak reception. You can check the DAB signal strength
through the System Settings function (see "Accessing the DAB menus" below).
Performanautomaticsearch
It is possible to update the list of stations received by doing another automatic search for
DAB stations. New stations and services will be added to the DAB broadcast. To get the new
stations and new DAB services available, do an automatic search regularly.
To do this, press the button
and the automatic search begins. Or the
to access the configuration menus. Select the menu
buttons then confirm by pressing the Enter button. The automatic search begins.
42
V.1.0
basicuse
All manuals and user guides at all-guides.com
or
buttons to select the desired
button to confirm. The selected station is
appears on the screen. This means that
button
"search all"
using the
or
Recherche
At the end of the search, the first station found in alphanumeric order is broadcast.
To display the other available stations, press the
station of your choice, and then press the
broadcast.
If no station is found, check the telescopic antenna; take it out vertically and fully extend it.
Change the installation location if necessary. Check if digital radio stations are broadcasting
in your area. You can check the DAB signal strength through the System Settings function
(see "Accessing the DAB menus" below).
Performamanualsearch
Manual search allows you to perform a specific search over a frequency. This is useful if
you want to get the best reception possible for a particular station or if you want to get the
channel list of a certain frequency without having to perform a full search.
To do this, press and hold the
button to access the configuration menus.
Select the menu
"manual setting"
using the
the
button. The band name and frequency are displayed.
Reglage manuel
Press the
or
buttons to switch between the frequency ranges 5A to 13 F.
Press the
button to open the selected range and display the signal strength. You can
or
buttons to select the DAB
button to confirm. The selected station is
or
buttons, then confirm by pressing
Reglage manuel
Reglage manuel
43
V.1.0
basicuse
Publicité
