SFE 95-STD1 Manuel D'utilisation page 24

S F E
4-OPERATION
4.1 General information
The controller automatically starts the regeneration cycle as soon as one of the start-up
conditions is reached, or the cycle can be manually started pressing the immediate
regeneration button.
The controller can be provided with a chlorine producer driver that starts during phase 2
E
(the brine suction phase) of the regeneration cycle.
N
4.2 Control panel description
G
L
I
S
H
4.3 buttons
All manuals and user guides at all-guides.com
Key
Down arrow
Regeneration
Up arrow
Description
It is used to edit the displayed value during a
programming step. Press it together with the
arrow up key for 5 seconds to open the
advanced settings menu.
Press and release to access the basic
settings menu. Press for 5 seconds to
manually start the regeneration. While
programming, it allows switching to the next
parameter.
It is used to edit the displayed value during a
programming step. Press it together with the
arrow down key for 5 seconds to open the
advanced settings menu.
22