Télécharger Imprimer la page

IB RUBINETTERIE BELMONDO BT410 Notice De Montage page 3

Publicité

Les langues disponibles

Les langues disponibles

EN
TECHNICAL DATA
Minimum dynamic pressure: 0.5 bar
Maximum operational pressure: 5 bar
Recommended operational pressure: 1-5 bar
It's recommended to use a pressure reducer in case of
static pressure superior than 5 bar inside the waterpipe.
Maximum hot water temperature: 80°C
INSTALLATION, MAINTENANCE AND PRELIMINARY CHECKING PROCEDURE
In order to get your device work correctly and fine in time, must ensure compliance with the mode
of installation and maintenance described in this booklet. Relying on a qualified plumber. Make
sure that the system is free from all debris and impurities existing.
INSTALLATION
Fig. 1: Make a hole in the wall with a depth of MIN 58mm MAX 65mm
(MIN 2.28 in MAX 2.56 in). NB The min / max references are intended for a finished wall, including
the covering.
Fig. 2: Insert the body into the cutout.
Fig. 3-4: Connect the body to the water supply, following the direction of the arrow printed on the
body to determine the entrance and exit. It is advisable to use hemp to ensure tightness. Fix the
recessed part taking into account both vertical and horizontal perpendicularity with the aid of a
spirit level.
Fig. 5-6: Repeat steps 1-2-3-4 to install the diverter. Create the system following the inputs and
outputs provided on the back of the diverter, as shown in the figure.
Fig. 7: Reduce the gap in the wall.
Fig. 8: Screw the bell on the taps and on the diverter. Insert the handle on the screw rod and press
until it clicks to fix it correctly.
After connecting the body to the system, turn on the stopcocks and check that the mixer tap unit
operates correctly. Keep the tap pressurised for a few minutes checking eventual leaks.
CLEANING
In order to obtain a correct cleanliness, exclusively wash them with soap and water, rewash and dry
them with a soft towel and deerskin. Avoid the usage of alcohol, solvents, solid or liquid detergents
which contain corrosive or acidic substances, abrasive sponges, swab with metallic strings
because they could irreversibly compromise the surfaces.
THE USAGE OF THIS KIND OF DETERGNETS DURING THE CLEANING OF THE MIXER EXCLUDE IB
RUBINETTERIE FROM ANY WARRANTY OBLIGATION.

Publicité

loading

Ce manuel est également adapté pour:

Belmondo bl100