Inventum KV1800S Mode D'emploi page 25

7
troubleshooting
In case of a failure in the electronic system, one of the LEDs on the control panel may flash.
Breakdown code
LED 6°C flashes
LED 3°C flashes
LED 2°C flashes
Problem
Appliance is not functioning;
light does not work
Temperature inside the
larder is too high or too low
Appliance is excessively
noisy
Note: gurgling and hissing noises due to expansion in the refrigerant circuit are normal.
Cause
Failure ambient temperature sensor
Failure defrost sensor cooler
Failure temperature sensor cooler
Cause
Appliance is not plugged in
Thermostat has been set incorrectly
Air circulation vents are blocked
Has the appliance been installed
correctly?
Are the pipes at the back touching or
vibrating?
Solution
Contact the Inventum customer service.
Contact the Inventum customer service.
Contact the Inventum customer service.
Solution
Plug the appliance in the socket
Set the thermostat correctly
Clean the ventilation openings
Check the installation
Check it and move the appliance forwards
25
English •