LENCO IPD-4600 Guide De L'utilisateur page 9

This model adopts different iPhone / iPod models. If the docking port will not be used for
an extended period of time, it is recommended to cover the docking port by using the
"Dock Cover " insert (included).
1 Select a suitable adaptor for your iPod (the one with your iPod at the time of purchase)
and insert it into the docking area.
Your iPhone / iPod can now be inserted into the docking port by placing the connector
on the bottom of the iPhone / iPod connector in the docking bay.
Caution : Please be careful when seating the iPhone / iPod into the docking to avoid
damaging the 30-pin connector on the iPhone / iPod or in the docking system.
2
Press the button on main unit or press STANDBY
turn on the unit.
3. Press the FUNC button on main unit or press the iPHONE button from the remote control
to select iPhone/iPod mode. The "iPHONE" indicator is shown on the LCD display.
To start playback music, press the PLAY/PAUSE
To resume music , press the PLAY/PAUSE
You may press the VOLUME + / - button to adjust the volume to a desired level.
To skip to next or previous song, press the
control.
Note: The volume level cannot be adjusted using the volume control on your iPhone
/ iPod after being docked.
To mute the volume, press the MUTE button and the "MUTE" indicator blinks
on display.
Press the MUTE button again to resume listening the music.
4
To turn off the unit, press the
remote control until the "iPHONE" indicator disappear from the display.
When the unit is powered and once the iPhone / iPod connected to the docking station,
the unit recharges the iPod battery.
All manuals and user guides at all-guides.com
Listening to iPhone / iPod
button on main unit or press STANDBY
9
button on remote control to
button once.
button again.
/ button from the remote
button on