Publicité
Les langues disponibles
Les langues disponibles
WARNING
Wear correct clothing, gloves and safety glasses before
maintenance.
CAUTION
Use only approved replacement parts.
CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
9.1
GENERAL MAINTENANCE
•
Before each use, examine the machine for damaged,
missing, or loose parts such as screws, nuts, bolts and
caps.
•
Tighten correctly all the fasteners and caps.
•
Clean the remaining snow on the machine with a brush.
9.2
REPLACE THE SCRAPER
17
9
WARNING
Use only approved replacement scrapers.
WARNING
Wear heavy gloves or wind cloth around the blade when
you touch the blade.
WARNING
The scraper is located at the bottom of the impeller housing.
Ensure that the battery is not installed in the tool.
1. Turn the machine to its side.
2. Remove the 5 bolts (17) below the deck that attach the
scraper (9) to the machine.
3. Remove the worn scraper (9) from the machine.
English
4. Install the new scraper (9).
5. Install and tighten the bolts (17) that you removed.
9.3
REPLACE THE BELT
18
29
Make sure to turn off the bail lever and remove the battery
pack(s) before performing any maintenance task on your
snow thrower.
1. Remove the screws (18) on the side wear pad (27).
2. Turn the large pulley (29) counterclockwise while you
remove the remaining belt (28).
3. Turn the new belt (28) onto the pulleys (29).
4. Install and tighten the screws (18) that you removed.
9.4
REPLACE THE IMPELLER
11
27
28
WARNING
10
EN
Publicité
