Makita UH200D Manuel D'instructions page 9

ENGLISH (Original Instructions)
1. Battery cartridge
2. Buttons
3. Lock-off button
4. Switch trigger
5. Indication lamp
6. Trimming direction
7. Tilt the blades
8. Hedge surface to be trimmed
9. String
10. Clamping nuts
11. Chip receiver
12. Screws on the shear blades
13. Blade cover to be always installed
before installing the chip receiver
14. Brush
SPECIFICATIONS
Blade length
Strokes per minute (min
Overall length
Net weight
Rated voltage
Battery cartridge
Battery charger
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
............... Take particular care and attention.
...... Read instruction manual.
............... Danger; be aware of thrown objects.
............... Keep bystanders away.
............... Cutting means continues to run after the
motor is switched off.
............... Do not expose to moisture.
Cd
......... Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
All manuals and user guides at all-guides.com
Explanation of general view
15. Machine oil
16. Blade cover
17. Undercover
18. Locking lever
19. Press
20. Turn
21. Screws
22. Crank
23. Shear blades
24. Basic alignment line on the tool
housing
25. Pins
26. Apply grease
27. Recessed part of crank
28. Oval holes that are overlapped
Model
-1
)
END010-4
29. Hole in the base plate of shear
blades
30. Base plate
31. Bent part of the base plate of
shear blades
32. Groove in the undercover
33. Hook hole
34. Grass shear blade
35. Grass shear blade cover
36. Storage case
37. Base frame
38. Groove
39. Change lever
40. Protrusion on base frame
UH200D
200 mm
1,250
460 mm
1.2 kg
D.C. 10.8 V
BL1013
DC10WA
Accumulators and their implementation in
accordance with national laws, electric
equipment and batteries and battery
pack(s) that have reached the end of
their life must be collected separately and
returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for trimming hedges.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
ENE014-1
GEA010-1
9